Why Can’t I Pair My Bluetooth Device ?

 If you have purchased a new mobile device or are trying to add another mobile device to your Alpine Bluetooth head unit and are receiving a pairing failed message you will want to check the “Paired Device List” as it may be full and delete any old or unused devices.

For Alpine CD Headunits CDE-133BT, CDE-135BT, CDE-136BT, CDE-HD137BT, CDE-HD138BT and CDE-W235BT

  1. Press and hold the phone/setup button for three seconds to enter “Setup”
  2. Using your volume control, select “Paired Dev” and press “Enter”
  3. Using your volume control scroll through the list of paired devices
  4. Select a paired device to be deleted by pressing “Enter” then use your volume control to select “Clear” and press “Enter. (a cleared message will appear)
  5. Repeat steps 4 & 5 to delete multiple devices.
  6. Press and hold the phone/setup button for three seconds to exit “Setup”

For Alpine CD Headunits and Digital Media Recievers CDE-143BT, CDE-147BT, CDE-HD148BT, CDE-HD149BT, CDE-153BT, CDE-154BT, UTE-42BT and UTE-52BT

  1. Press and hold the audio button for three seconds to enter “Setup”
  2. Select “Bluetooth” and press “Enter”
  3. Using your volume control, select “Paired Dev” and press “Enter”
  4. Using your volume control scroll through the list of paired devices
  5. Select a paired device to be deleted by pressing “Enter” then use your volume control to select “Clear” and press “Enter.
  6. Use your volume control to select “Yes” and press “Enter” (a cleared message will appear)
  7. Repeat steps 4, 5 and 6 to delete multiple devices.
  8. Press and hold the audio button for three seconds to exit “Setup”

For Alpine AVN Headunits IVE-W535HD, INE-S920HD, INE-W927HD, INE-W940, IVE-W555BT,  INE-Z928HD, INE-W957HD, X008U, X009U, X009GM and X009-FD1

  1. Press the “Phone” button to enter “Setup”
  2. Press the “Change” or “Change Device” soft key
  3. Press the “Delete” soft key next to the device you wish to delete
  4. “Do You Wish To Delete” message will appear
  5. Press “OK”
  6. Repeat steps 3, 4 and 5 to delete multiple devices.

For Alpine AV Headunit IVE-W530

  1. Press the “Setup Button”
  2. Press “Source Setup
  3. Press Bluetooth Setup
  4. Press Clear Device
  5. Press the “Double Arrow” next to the device you wish to delete
  6. Press “OK”

 

Attached Files
There are no attachments for this article.
Related Articles RSS Feed
Why is it important to purchase Alpine product from an authorized dealer?
Viewed 2898 times since Fri, Oct 13, 2017
Storing and transferring tag information on Alpine AV and AVN head units
Viewed 2774 times since Fri, Oct 13, 2017
Firmware Update for CDE-170
Viewed 4390 times since Mon, Aug 13, 2018
How do I locate my nearest authorized Alpine dealer?
Viewed 8418 times since Fri, Oct 13, 2017
Retrieving the Serial number and firmware version on Alpine AV and AVN head units
Viewed 13496 times since Fri, Oct 13, 2017
How do I pair my phone with my Alpine head unit?
Viewed 192199 times since Mon, Oct 9, 2017
Storing and transferring tag information on Alpine CD and Mech-less head units
Viewed 2825 times since Fri, Oct 13, 2017
What is the cost for out of warranty repair on my Alpine unit?
Viewed 8814 times since Thu, Oct 12, 2017
How do I contact customer support?
Viewed 14942 times since Fri, Oct 13, 2017
How Long will it take to get my Alpine or OEM unit serviced?
Viewed 2968 times since Wed, Oct 11, 2017